How to make your own “giant” house


A DIY house is about as simple as it gets.

But the process can take years, and even the most savvy DIYers struggle to build something like the one in the video above.

The video is a two-part tutorial series from DIY expert Joe Bologna, which details the process of building your own home, from the planning stages through the construction process.

Bolognes house in Los Angeles is a big enough project to challenge the limits of your imagination.

Its not a single-family home or a multi-family one-bedroom apartment, but it does have a small basement, a garage, and a kitchen.

And it’s not the most spacious or spacious-looking house either, so it’s probably not the best choice for a big family.

The goal is simple: build a tiny house.

The details are all up to you, but in a few simple steps you’ll be able to turn your bedroom into a cozy den, and the garage into a storage closet.

The DIY project was inspired by a friend of mine who had a similar idea, and was trying to find a small house for a friend’s family.

After a few weeks of planning and planning and researching, Joe’s house had everything a typical tiny house would have.

The basic construction was simple enough: A two-level, wood-frame house with walls made of wood, and windows on the side that let in sunlight.

All you need is a little bit of wood.

The project was initially funded by Joe’s wife, and they sold the house for $1,000.

It has since been used for events like a charity auction and a fundraiser, and Joe has built more than 50 homes around the world.

But he’s also used it to make money for other projects.

He built a boat for someone who was missing his arm, and has since turned that boat into a custom-built yacht, and built an outdoor house in the backyard of his house to house a family of his own.

“I started with the idea that I’d like to build a small, quiet house that could be a place where I could get away and relax, but still be in the world,” he told the BBC.

Joe’s video shows you how to build his house in a matter of days.

First, you need a couple of different types of wood to build the house, depending on what kind of space you’re looking to create.

The first wood you need to get started is a pine, which you’ll need to start by chopping down trees in your neighborhood.

This will allow you to have a big tree trunk, and it will make the house taller, as well as making it look much bigger.

Then you need some planks, which are pieces of lumber you cut down and lay out on a piece of wood and glue together.

The planks will make up the foundation of the house.

Next, you’ll add the ceiling tiles, which should come in handy if you’re going to be building a living room or kitchen, or perhaps a loft or bedroom.

The final step is attaching the roof and framing the house to the wood structure, which means attaching the house’s hinges, roof, and walls to the planks.

This means the house will have a solid foundation and will have enough strength to support itself, so that the house won’t topple if the sun hits it.

You can download the whole video to watch here.

The next step is to figure out where you want to build it.

Joe suggests building a “large” home in a small location, or a “small” home on a big piece of land.

But there are many different options out there.

Here’s what you need: A lot of wood You can buy lots of wood that is already in use or that’s already in your yard.

You may want to consider getting wood that’s been in your garage for a while.

If you’re planning to move into a house with more space, then you can find wood in other parts of the yard, such as on the garage floor or on the patio.

But if you want a small space that’s close to your neighbors, you can start by picking up some big trees.

You’ll probably need about 15 feet of thick, soft wood.

Joe says that a good quality oak tree will weigh about 1,000 pounds.

A small tree like a poplar tree will be around 3,000 to 4,000-pound.

A mature poplar is about 2,000 feet long.

If the tree is mature and big enough, you should be able find a good one to cut down.

The last step is adding walls.

Joe uses plywood and planks as the walls, but you can also use nails, screws, or screwspile boards together.

You could use plywood boards and nails as walls.

But that would take a long time to get them all lined up correctly.

You might want to start with planks that you can use as walls, and then use planks to make the wall